Differences

This shows you the differences between two versions of the page.

--- en:netzer:licenses [2011/12/05 21:38] – holtmann
+++ en:netzer:licenses [2025/06/11 20:42] (current) – external edit 127.0.0.1
@@ Line 2: / Line 2: @@
 Since version 1.4, it is distinguished between two firmware versions:
-  * The continuously freely maintained and published version **"base"**,
-  * As well as the new version **"pro"**, enriched with new and powerful features.
-The latter one is not freely offered, but acquired with a new license.
+  * The no longer maintained and published version **"base"**,
-This license may either be individually bought, in this case, the firmware package is supplied by e-mail.
+  * As well as the version **"Standard"** (formerly pro), enriched with new and powerful features.
-Or it is bought in the shop together with a purchased Netzer.
-<note important>The pro version requires an update to [[de:netzer:boot3|Bootloader 3]].</note>
+All the projects within a revision are offered both as **base** and **pro** version.
-Overview about the current service features of the 1.4 pro package:
-^ Name ^ Description^
-|Allocation modes IP-address|Error handling in the event of DHCP-servers not found. Further details under: [[de:netzer:networksettings|Network settings]]|
-|GPIO counter|For IO0, IO1 as well as IO2 a counter mode may be configured. Further details under: [[de:netzer:io#Beam counter(from version 1.4 pro)|Beam counter]]|
-|ADC|IO4 and IO5 supply 10 bit ADC-values. Further details under: [[de:netzer:io#ADC (from version 1.4 pro)|ADC]] |
-|PWM|IO3 and SPI_INT supply 10 bit PWM and up to 16 bit impulse. Further details under: [[de:netzer:io#PWM- and impulse generator (from version 1.4 pro)|PWM & Impulse]]|
-|GPIO-Server|The GPIO server sends messages in the event of decreasing or increasing beams at the digital pins. Moreover, all new modes (ADC, PWM, Impulse) are directly accessible via the server. Further details under: [[de:netzer:gpioserver|GPIO Server]]|
-|More GPIO settings|Adjustable radix, auto-refresh, authendification, ... Further details under: [[de:netzer:io#General configuration (Version 1.4 pro)|GPIO settings]]|
-|HTTP| The port number may be changed.|
-|SPI Master|All pins may be accessed via a slightly changed protocol. Hence, several SPI slaves are possible now as well.|
-|Access control|Since version 1.3, the [[de:netzer:accesscontrol|Access control]] is available. With immediate effect, it is only included in the pro service package.|
+===== Base license =====
+<WRAP center round important 60%>
+Since version 1.6 base versions and bootloader 2 are no longer maintained and supported!!!
+Please ask [[en:contact|here]] for upgrading to latest bootloader 4.
+</WRAP>
+Installing base projects requires the installed [[boot2|Bootloader 2]].
+===== Standard license (formerly Pro) =====
+<note important>The standard version requires an update to [[boot3|Bootloader 4]].</note>
+An update to bootloader 4 is sent you by mail or is already installed when buying a Netzer from our distributors.
+===== Downloads ======
+Here is the complete download [[history|history]].