The IO project

Configure all features via web interface

Select the language of the web interface dynamically

Different IP access modes (DHCP, AutoIP etc.), look at network settings

Multilingual (German, English, Spanish and Netherlands) webserver for diverse settings.

Multicast DNS functionality for easy and quick access via the network

The serial server (net socket) with interfaces UART, SPI Master, I2C Master and I2C monitor

Asynchron serial interface (UART) interface has new features like parity and handshake signals

All pins can be accessed via a new SPI-Master protocol. This new feature can also be ussed to adress more than one slave.

Configuring, writing and reading Netzer GPIOs via web interface

Automatic refresh of the GPIO page within configurable time

Support of advanced IO peripherals like ADC, PWM, impulse generator, impulse capture und edge counters (look at Netzer GPIO)

Writing and reading Netzer GPIOs via GPIO server

Extending the serial server with TCP Client functionality and DNS resolver

All Netzer GPIOs are configured as digital inputs.

The GPIO server is listening at port 65000.

Authentification at GPIO server is enabled

Automatic reloading of the GPIO web page is disabled

The serial server is configured for port 64000.

The serial mode is deactivated.

UART is configured for 19200 Baud, no parity, no handshake.

SPI is configured for 10,4 MHz, mode 0, sample at the middle.

I2C is configured for 100 kHz